Before we start - check you have everything you need.

​These sets come with the following parts:

  • 5 x White 30cm Bit Lights
  • 1 x Flicker Effects Board
  • 1 x 6-Port Expansion Board
  • 1 x 5cm Connecting Cable
  • 5 x Trans-Orange 1x1 LEGO® studs

Plus either

1 x USB Cable (EBS130)
1 x Flat Battery Pack - CR2032 Batteries included (EBS133)

​And of course you'll need LEGO® set 21309 - LEGO ® Ideas set NASA Apollo Saturn V.


This should be the easiest instruction page for us - we haven't changed the Light My Bricks set at all!

This kit is just a cut down version for people who want to keep their Saturn V rocket in one piece, so the extra lights will never be seen.

Go to the main instructions page HERE.

Read the guidance and follow the instructions up to step 13, where you connect the flicker effects board to the Expansion Board with a 5cm cable.

If you have set EBS133 - Flat Battery Pack - continue with the instructions to the end of the page.


If you have set EBS130 - USB Cable - follow the same steps but instead of plugging in the flat battery pack, plug in the USB adaptor cable.

Route the big USB plug end down the rocket and out the bottom between the boosters. Then just connect to a standard USB power supply or USB extension cable.

​Questions / Comments / Need help?

Check out our User Guide and Troubleshooting sections. 

Or get in touch - we're always happy to help.